Torpedo Reload

The Torpedo Reload gives you the chance to crank up your favorite amp to practice with the best amp tone and record your most beautiful guitar take and tune it to perfection for your mix.

With the Torpedo Reload, you can simultaneously record three tracks out of one take :
- your dry guitar sound through the DI output
- your dry amp sound through the Loadbox output. Add the cabinet afterwards in your DAW with the Wall Of Sound plugin
- your full rig miced up in the room like a regular recording, that can be tuned to perfection thanks to the attenuation given by the Reload.

The Match function allows you to adjust the Replay output level being sent to the amp in accordance to the guitar signal coming in the Reload, so your amp receives the signal like you were directly plugged into it.

The Torpedo Reload is built around the RE-ACT™ technology.
RE-ACT™ stands for "Reactive-Active Attenuator", and is described as the conjunction of two elements:
-a reactive loadbox inherited from the critically acclaimed Torpedo Live series
-followed by an ultra-low-distorsion, wideband, low-noise solid-state amplifier based on a widely used HiFi architecture.
The role of this system is to present a speaker-like impedance to your amplifier, get rid of the
power, then re-amplify it to the desired volume.
This design offers a number of advantages over resistive/passive ones:
-the amp is always connected to a fixed impedance, which is as close as possible to a real speaker impedance
-as the impedance does not change with the attenuation, the tone of your amp stays the same
-the volume you hear in the room can be set continuously, you get REAL master-volume control (SPEAKER parameter on the Reload) after your amplifier’s master volume
-the speaker-output impedance of your amplifier is independent from the speaker impedance of the actual speaker cabinet you plug on the Torpedo Reload

The Torpedo Reload comes with 24 Wall of Sound cabinets.

Specifications :

Loadbox

Reactive load
Nominal impedance: 4, 8 or 16 Ohms (switch)
Maximum admissible power: 150 W (200 Watt peak)
Cooled by temperature-controlled fan
Inputs / Outputs

Speaker Input : Jack 6.35 mm (1/4″) unbalanced (TS)
Speaker Output : 2 x Jack 6.35mm (1/4″) unbalanced (TS)
DI Input : Jack 6.35mm (1/4″) unbalanced (TS)
DI Output : XLR Balanced male
Loadbox Output : XLR Balanced male
Replay Inputs : Jack 6.35 mm (1/4″) balanced (TRS)
Replay Outputs : Jack 6.35mm (1/4″) unbalanced (TS)



Weight and dimension

Width x Depth x Height: 320 x 200 x 89 (mm)
Weight : 4,5 kg