Torpedo Reload

$749.99tax incl.

The Reload is the ideal combination of the devices you must have in a modern studio for the recording of electric guitars and basses:
a power attenuator, a multi-impedance load box, a DI and re-amping box.
The RE-ACT™ technology presents your amp with a consistent speaker impedance and delivers a full transparent sound to your DAW.


The Torpedo Reload comes with 24 Wall of Sound cabinets.

More info

The Torpedo Reload is built around the RE-ACT™ technology.
Attenuators are usually known for the negative impact they have on your tone in cases of heavy attenuation. On the contrary, the Reactive-Active technology presents your amplifier with a consistent speaker’s impedance no matter what level of attenuation you’re at, and thus preserves the specific character of your amplifier. With a choice of 4, 8, or 16 Ohms, your amplifier (up to 150W RMS) will actually see real speaker impedance, and your tone will remain constant throughout the continuous attenuation curve.

Transparency is the key.

Torpedo Reload is your reamplifying device of choice. The most difficult part in re-amplification techniques is finding the output level on the DAW that matches the level of your guitar when it is directly connected to the amplifier. This problem is solved with the unique MATCH function.
MATCHTM compares the signal as it comes from the guitar (plugged to the DI input) with the signal that has been recorded (and which is sent to the REPLAYTM Line Input) so that what you send to the amp is the ideal level only.

Record your guitar using the DI, send the signal back to your amp using the REPLAY, drive your amp the way it should be driven and lower the level or simply make it silent with RE-ACT, record the signal from the load box, and even use your own microphone and cabinet for a third take – all simultaneously!

The Torpedo Reload comes with 24 Wall of Sound cabinets.


Specifications :
 
Load box

Reactive load
Nominal impedance: 4, 8 or 16 Ohms (switch)
Maximum admissible power: 150 W (200 Watt peak)
Cooled by temperature-controlled fan
Inputs / Outputs

Speaker Input : Jack 6.35 mm (1/4″) unbalanced (TS)
Speaker Output : 2 x Jack 6.35mm (1/4″) unbalanced (TS)
DI Input : Jack 6.35mm (1/4″) unbalanced (TS)
DI Output : XLR Balanced male
Load box Output : XLR Balanced male
Replay Inputs : Jack 6.35 mm (1/4″) balanced (TRS)
Replay Outputs : Jack 6.35mm (1/4″) unbalanced (TS)



Weight and dimension

Width x Depth x Height: 320 x 200 x 89 (mm)
Weight : 4,5 kg


All product names used in this website (www.two-notes.com, store.two-notes.com and associated Two notes Audio Engineering websites) are trademarks of their respective owners, which are in no way associated or affiliated with Two notes. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were studied during Two notes' sound model development.

Customers who bought this product also bought: